AudioControl LC Series 4 Channel AmplifierDescription
LC Series 4 Channel Amplifier
“Making Good Sound Great” is our passion at AudioControl and that legacy continues with the LC-4.800 multi-channel amplifier.
Maximum Sound Quality
The AudioControl LC4.1200 Amplifier offers two great features for unlocking amazing sound in your vehicle. Serious power and extensive control. The amplifier can be setup as either 4,3 or 2 channel configurations to suit your needs.
Designed for use with many different combinations including
Active 2 Way Component Speakers
Front and Rear Passive Speakers
Front Passive Speakers & Subwoofer
You could even use it for 2x Subwoofers!
Big On Output
With a long heritage of home audio, AudioControl’s 4 Channel Matrix Amplifier offers some serious grunt matched with amazing sound quality.
Thanks to its efficient Class-D topology, the LC-4.800 offers full 20Hz to 20kHz audio range with a warm, clean and detailed sound like you would find in the AudioControl home theatre range.
With up to 200 Watts RMS per channel and over 400w Bridged, this packs a serious punch with its 4 channels of output.
We’ve even included an assignable stereo RCA output for additional amplifier connection. Great for external mono block amplifiers.
The Input You Need
Integrating an amplifier into the factory audio system of many vehicles can be confusing and scary. Dealing with many input channels, active and passive speaker options and high powered outputs makes your basic line out converter not an option.
With 6 Channels of high level input accepting up-to 400 watts per channel using the same technology found in our LC range of interfaces, the LC-4.800 makes easy work of taking all of these signals and giving you the smooth full range output you want.
Using an aftermarket headunit?
We’ve got you covered with 4 channels of low level RCA input for direct control of each channel.
Get That BASS!
Using patented technology, each AudioControl LC-4.800 includes the AccuBASS processor system.
Ever fitted an amplifier to a factory system and found the bass lacking the punch you wanted? Designed to correct bass removed from the factory audio system to protect the factory speakers, AccuBASS processing is an adjustable feature that gives your new audio system rock solid bass response that you wanted.
Complete Control
Featuring eight active speaker level inputs with summing, coupled with an intuitive Linkwitz-Riley crossover network, the LC-4.800 can be easily integrated with most factory installed source units.
The patented AccuBASS® circuit compensates for factory bass roll-off and provides maximum bass performance.
All of this can easily be adjusted using the precision indented rotary pot controls and high quality switches at the top of the amplifier for easy setup and control.
Control At Your Fingertips
Control your subwoofer bass level with ease using the optional ACR-1 Bass controller, compatible with the LC-4.800 4 Channel amplifier thanks to the ACR port.
(Available Separately)
What Do You Get?
Specifications
Inputs
- Preamp Inputs: 4 Balanced
- Preamp Input Voltage Range: 500 mV – 6 Vrms
- Speaker Level Inputs: 6
- Speaker Level Input Voltage Range: 3 V – 40 Vrms
Outputs
Rated Continuous (RMS) Power at 14.4V:
- 4 Ω – 125 W x4 RMS
- 2 Ω – 200 W x4 RMS
- 4 Ω – 400 W RMS BRIDGED
Performance
- Frequency Response: 10 Hz – 30 kHz
- Signal to Noise: 102 dBA, Ref 200 W @ 4 Ohm
- THD+N: < 0.1%
- Power / Ground Wire Gauge: 3 AWG wire
- Fuse Rating: 12x 40 A
- Crossover: Linkwitz-Riley, Adjustable From 30 Hz – 300 Hz
- PFM Subsonic Filter: 24 Hz
Whats In The Box
1x Amplifier
1x Speaker Connector
2x 40 Amp Fuse
1x Manual
1x Awesomeness
